Solids lifting outlets are used by many people to remove the fish solids from the base of fish tanks. They are very easy to build using simple off the shelf parts from the plumbing aisle [More]
In this video I show you how to construct your own solids lifting over flow for an aquaponics system or pond. It is used to drain the solids from the bottom of the tank, and [More]
Thought I would post a bit of a look at how we managed to clean out the grow bed that was loaded with fish solids.. I think this is part of the reason there was [More]
After a false start the other week I finally have a new Radial Flow Filter with 50mm/2″ piping installed into the aquaponics system.. The larger pipe has helped with the flow rates & I have [More]
Solids in Aquaponic Grow Beds | Rising pH | Denitrification | Cleaning MUCK G’Day Folks. Have seen a steady rise in the pH of the aquaponic system over the past few months & have put [More]
Solids Filter For Basic Chop & Flip Aquaponic System | Canister Filter G’Day Folks. Here’s a small DIY solids filter build you can knock together for a few $ for your Cut & Flip or [More]